Grit Sizes – ANSI

Particle Size Conversion Chart- ANSI

This chart is designed to compare millimeters, microns and inches to sieve sizes and match them to corresponding ANSI grit sizes.

Millimeters Microns Inches ASTM Sieve Tyler Sieve *ANSI Table 2 *ANSI Table 3
5.60 5600 0.220 3 1/2 3 1/2 S-S -
4.75 4750 0.187 4 4 4 -
4.00 4000 0.157 5 5 5 -
3.35 3350 0.132 6 6 6 -
2.80 2800 0.110 7 7 7 -
2.36 2360 0.093 8 8 8 -
2.00 2000 0.079 10 9 10 -
1.70 1700 0.067 12 10 12 -
1.40 1400 0.055 14 12 14 -
1.18 1180 0.046 16 14 16 16
1.00 1000 0.039 18 16 20 20
0.850 850 0.033 20 20 22 24
0.710 710 0.028 25 24 24 -
0.600 600 0.024 30 28 30 30
0.500 500 0.02 35 32 36 36
0.425 425 0.018 40 35 40 -
0.355 355 0.014 45 42 46 46
0.300 300 0.012 50 48 54 54
0.250 250 0.010 60 60 60 60
0.212 212 0.008 70 65 70 70
0.180 180 0.007 80 80 80 80
0.150 150 0.006 100 100 90 90
0.125 125 0.005 120 115 100 100
0.106 106 0.004 140 150 120 120
0.075 75 0.0030 200 200 150 150
0.063 63 0.0025 230 250 180 180
0.053 53 0.0021 270 270 220 220
0.045 45 0.0018 325 325 240 240

Micro Grits

Millimeters Microns Inches D3% Max (microns) D50 +/- (average micron size) D94% Min (microns) ANSI Grit Size
0.0500 50.0 0.00200 74-80 47-53 26-32 240
0.0395 39.5 0.00156 67-72 37-42 20-25 280
0.0295 29.5 0.00116 55-60 27-32 15-19 320
0.0230 23.0 0.00091 38-42 21-25 10.5-14.5 360
0.0183 18.3 0.00072 31.5-35.0 16.5-20 7.5-10.5 400
0.0139 13.9 0.00055 28.0-30.5 12.5-15.3 8.5-8.0 500
0.0106 10.6 0.00042 24.0-27.0 9.2-11.9 - 600
0.0077 7.8 0.0003 20.5-22.5 6.5-8.8 - 800
0.0058 5.8 0.00023 16-18 5.2-6.4 - 1000
0.0038 3.8 0.00015 13.5-15.5 2.8-4.8 - 1200
0.0450 45 0.0018 80 38-52 20 F
0.0275 27.5 0.0011 45-55 23-32 9-16.5 FF
0.0160 16 0.00063 35 12-20 5 FFF
0.0110 11 0.00043 35 11 4 FFFF

  Particle Size Conversion Chart ANSI

*A grit size is defined by the distribution of grits retained on a sieve set up that meets the requirements of ANSI Table 2 or 3. The numbers in the two sieve columns in this chart represent the midpoint sieve for the grading of the corresponding grit size. We’ve chosen to show the midpoint sieve since more material will be retained on this sieve than on any other in the sieve set up.